David, I agree. Too far toward the rep lever. Do you mean shimming the top half of the wippen flange? If so I agree. That might be the only thing that I can do. Greg From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of David Brown Sent: Thursday, November 15, 2007 12:58 PM To: pianotech at ptg.org Subject: Steinway action noise Dear Greg and all- This was a problem in the late 90's to early 2000's with new Steinway models. It was usually corrected with a combination of shimming the top half of the rep flange out more , relieving the touching portions of the jack / hammer flange and making sure that after touch was not excessive. I would have to agree with Ed though, that this rep looks WAY too far toward the player. David C. Brown Arizona State University School of Music Piano Technician 1-480-965-6760 david.c.brown.2 at asu.edu -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20071115/32fe8b8e/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC