At 15:05 -0200 17/11/07, Francisco Motta, afinador de pianos wrote: >"...Owing to this not always being possiible on older.grand actions >using new hammer shanks, it will be foound necessary to insert a 1 >mm thick strip of veneer or cardboard unndemeath the lever flanges >(refer to sketch). This will compensate the difference in clearance >between the center and roller, whi1e facilitaating regulation to the >repetition action (refer to Fig. 15)." At 09:21 +0000 17/11/07, John Delacour wrote: >...The simplest solution is probably to pack the lever rail with >card along the top of the screws and pack the near edge of the >hammer rail to force the flanges back as far as possible You detect some big difference in meaning between these two methods? Me no. >B = the cardboard Precisely! JD -- ______________________________________________________________________ Delacour Pianos * Silo * Deverel Farm * Milborne St. Andrew Dorset DT11 0HX * England Phone: +44 1202 731031 Mobile: +44 7801 310 689 * Fax: +44 870 705 3241 ______________________________________________________________________ -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20071117/4f293da0/attachment.html -------------- next part -------------- A non-text attachment was scrubbed... Name: P6C9F7CC3.png Type: image/png Size: 15118 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20071117/4f293da0/attachment.png
This PTG archive page provided courtesy of Moy Piano Service, LLC