At 00:38 +0100 22/11/07, Richard Brekne wrote: >..The jack of course should be parallel to the core of the knuckle >at a reasonable blow distance. For spec key dip if the key heights >are correct the whippens center position should yield the whippen >cushion / capstan on the magic line at half blow or at least >reasonably close to it... etc.etc. You are avoiding the issue as usual with verbiage, and as usual casting aspersions om your challenger as you usually do when you're challenged, such as "Setting the "spread" to spec and not worring about the rest seems wrong to me." Either put up or shut up. At 22:50 +0000 21/11/07, John Delacour wrote: >...you will of course be able to give an explanation, supported by >real numbers, of what problems you suppose will ensue from using >this time-honoured procedure... Give me the difference in ratios, in touch weight, in touch-depth:blow ratio etc. etc. that will ensue. I don't care how many classes and conventions and international fairs you've graced with your presence. If you're going to argue about technical matters you need to be able to give numbers and I am quite convinced that you are unable to do this. JD
This PTG archive page provided courtesy of Moy Piano Service, LLC