How would a little adhesive soaking into the wood affect anything? Terry Farrell ----- Original Message ----- From: PAULREVENKOJONES Glue absorption? Paul "If you want to know the truth, stop having opinions" (Chinese fortune cookie) In a message dated 09/05/07 12:51:41 Central Daylight Time, mfarrel2 at tampabay.rr.com writes: Question for those who are in the habit of laminating up new bridge roots - or maybe even those who don't, but might have some thoughts to share. I just completed building a bridge root for a customer that came out very nicely, but the overall curve of the bridge is off by a couple millimeters or so, much like other ones I have built in the past. I really don't understand that. One would think of the possibility of some small spring-back effect (but with 18 laminations?), but the curve error is always toward a tighter curve. How can that be? I don't think it is a significant issue as you can easily correct the bend with your pinky - but still, how does this happen? -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070905/44790862/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC