Dust collectors

[MICHAEL MORVAN]

Dale,
    We bought a Delta 4800 cfm dust collector with a 5 hp motor (around $1,600.00). It is designed to run 4 machines at once with 1200 cfm each. Now we can run the cnc machine, a buffer, sander and whatever else at the same time without a drop in vacuum. It is one of the best purchases we made.   Good luck,   Mike
  ----- Original Message ----- 
  From: Erwinspiano at aol.com 
  To: pianotech at ptg.org 
  Sent: Saturday, September 15, 2007 9:24 AM
  Subject: Dust collectors


   Saw dust princes
    The little 3/4 horse jet is refusing to provide enough suction p[power to clear the sawdust from the new monster 20" Grizzly planer. You guys with larger machines out there....What are you using?  I will eventually hook mine up to the Laguna  16 " & the   8 "& Jointer as well. I see that Grizzly has a 2 horse with large bags & 2.5 micron filter.
    Sounds like  deal for $275.00
   What say ye?
    Dale Erwin





------------------------------------------------------------------------------
  See what's new at AOL.com and Make AOL Your Homepage.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070915/5765e739/attachment.html