>I've used both iterations of this Tokiwa back action part without incident. With my luck, some heavy-hitter will come alone and start snapping parts. If not, I'll still be worrying about it. But when 4 where broken in the box, leaving me 1 short of a full set, I worry. I swapped them for the longer execution. I don't mind trimming wires, it's just one small operation in the damper fitting process. The 'short' tab had a noisier return which I didn't like either. I'd rather cove out the back of the back check than have a looming crisis because I am all too familiar with Murphy's First Law and often called being "1 short of a full set" myself. -- Regards, Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080404/ce0873c2/attachment-0001.html
This PTG archive page provided courtesy of Moy Piano Service, LLC