Not mine,\. Joe Goss RPT Mother Goose Tools imatunr at srvinet.com www.mothergoosetools.com ----- Original Message ----- From: "Carlos Ralon" <ceralon at comcast.net> To: "Pianotech List" <pianotech at ptg.org> Sent: Friday, April 04, 2008 7:24 PM Subject: Re: large slotted screwdriver > Warning: > Do not use the Slotted or Phillips screwdriver tips made for the tuning > hammer tips. They will eventually break your shaft of the tool at the > threads. Usually during a tuning. DAMHIK. > Carlos Ralon, RPT > ----- Original Message ----- > From: "Phil Bondi" <phil at philbondi.com> > To: "Pianotech List" <pianotech at ptg.org> > Sent: Friday, April 04, 2008 6:05 AM > Subject: Re: large slotted screwdriver > > > > > > > > paulrevenkojones at aol.com wrote: > > > >> Google "brace and screwdriver bit". You'll find plenty. I need to buy a > >> few new ones myelf. > >> > > Thanks Paul. I wasn't googling correctly. Thanks for correcting me. > > > > -Phil Bondi(Fl) > > > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC