OK Dean, no time for picture, but her is a simple sketch attached. Marcel Carey ________________________________ > From: deanmay at pianorebuilders.com > To: pianotech at ptg.org > Subject: RE: Centering Grand Jacks in the Window > Date: Sat, 5 Apr 2008 10:04:20 -0400 > > > Okay, now I’m really confused by all the different verbal descriptions. How about a picture? > > > > Dean > > Dean May cell 812.239.3359 > > PianoRebuilders.com 812.235.5272 > > Terre Haute IN 47802 > > > > ________________________________ > > From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Farrell > Sent: Saturday, April 05, 2008 6:22 AM > To: Pianotech List > Subject: Re: Centering Grand Jacks in the Window > > > > Correct - but be sure that the base of the jack body is free of the support device - support only one side of the wippen lever. > > > > "Tap gently with a small hammer while supporting the side" - of the wippen base lever- not the jack at all - "TO WHICH the jack must go to be centered." > > > > As stated, it only takes a gentle tap. > > > > Terry Farrell > > ----- Original Message ----- > > From: James H Frazee > > To: Pianotech List > > Sent: Friday, April 04, 2008 7:15 PM > > Subject: Re: Centering Grand Jacks in the Window > > > > Michael, > > > > Tap gently with a small hammer while supporting the side TO WHICH the jack must go to be centered. _________________________________________________________________ Trouvez vos infos rapidement et précisément avec Windows Live Instant Search ! Essayez-le maintenant! http://g.msn.ca/ca55/220 -------------- next part -------------- A non-text attachment was scrubbed... Name: jack centering.bmp Type: image/bmp Size: 173238 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20080405/8b3506da/attachment-0001.bin
This PTG archive page provided courtesy of Moy Piano Service, LLC