Grand Piano drop screw tool?No, But I have built a 4x8 shed with a pad out side my shop, ran out electricity and put in a panel that will give me 50 amps so I'll have 110 or 220. It's a 2 room structure with one side for compressor, which is going out soon with 3/4 copper plumbing for the air back to the shop. About 3 grand invested so far and I haven't even bought the Cyclone yet. I'm on it though, got to throw good money after good or it's all for no good. I refuse to put any of this on my credit card in this economy so it's all out of pocket. Should be done by fall. Hopefully before I'm old. Fenton ----- Original Message ----- From: Farrell To: Pianotech List Sent: Monday, April 07, 2008 3:09 AM Subject: Re: Dust Collection So Fenton, got your dust collector yet? Terry Farrell ----- Original Message ----- From: Fenton Murray To: Pianotech List Sent: Wednesday, February 20, 2008 3:42 PM Subject: Dust Collection List, I'm getting ready to spend more hard earned bucks on housing my air compressor and dust collection outside. In the process I'm going to switch from the old bag type dust collector to a cyclone system. I've been looking at the following web site and may very likely invest in their product if I'm not convinced otherwise. Anyone out there with a cyclone care to share their thoughts on this product, or another? http://www.clearvuecyclones.com/ Thanks, Fenton -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080408/7af5a0ff/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC