Hi, Get yourself some "Spider Wire" Plenty about how to cut it using a dowel in the archives. Joe Goss RPT Mother Goose Tools imatunr at srvinet.com www.mothergoosetools.com ----- Original Message ----- From: Tuneyourpianonow at aol.com To: pianotech at ptg.org Sent: Saturday, April 26, 2008 6:39 PM Subject: hammer return spring string I have a customer with a nice Yamaha M2 console. The hammer return spring strings are all rotten. Do I replace all the strings? My first choice. Or, do I replace the butt flange assy. (flange, spring, string)? Doing that I will probably have to travel the flanges. My guess at time would be longer to do the strings alone. All the bushings are moving well. No verdigris. Any suggestions? Am I looking at 4 to 6 hours or more? How much does a job like this run? Thanks Steve Kessler ------------------------------------------------------------------------------ Need a new ride? Check out the largest site for U.S. used car listings at AOL Autos. -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080426/6d611cc0/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC