No wheels? If I was to go that way, I think I'd opt for the wheels. Even with straps, I get tired of schlepping my tools around the music building... David Ilvedson, RPT Pacifica, CA 94044 ----- Original message ---------------------------------------- From: "Jon Page" <jonpage at comcast.net> To: pianotech at ptg.org Received: 4/28/2008 1:25:54 PM Subject: Jensen Tool Case >It's going to be either this one with a winged upper and SH lower pallets: >http://www.lanshack.com/SUPER-SIZE-Tool-Case---7-inch-depth-P232C113.aspx >or this one with G upper and H lower pallets... >http://www.lanshack.com/Technicians-Tool-Case---Deluxe-P230C116.aspx >$250 opposed to $150. If I were on a campus setting I would opt for >a wheeled case. >Since the zippered case which failed is my tuning case, I'll still be >looking for >a light weight case for convenience with minimal tool storage. The >latches are failing >on my 25 y/o+ cast, so this will replace that. >-- >Regards, >Jon Page
This PTG archive page provided courtesy of Moy Piano Service, LLC