See the attached. ddf | -----Original Message----- | From: pianotech-bounces at ptg.org | [mailto:pianotech-bounces at ptg.org] On Behalf Of David Love | Sent: August 01, 2008 8:03 PM | To: 'Pianotech List' | Subject: Decapping bridges with a router | | A couple of years ago I saw (or dreamt) a router adaptation | to take the bridge cap off. It consisted of a couple of | elevated skids attached to the router base that straddled the | bridge so that you could basically run a router down the | length of the bridge and take the bridge top down--very fast, | very smooth. Does anyone use that system and can send me a | picture of the skids and how they attached them? I have some | ideas myself but shortcuts are always welcome. | | David Love | davidlovepianos at comcast.net | www.davidlovepianos.com | | | | -------------- next part -------------- A non-text attachment was scrubbed... Name: Bridge cap - Router 4.JPG Type: image/jpeg Size: 32173 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20080802/427bc043/attachment.jpe
This PTG archive page provided courtesy of Moy Piano Service, LLC