Decapping the bridge

[Richard Brekne]

Exactomundo de pointo I have when using a combination of epoxy and 
bamboo skewers.  Didnt know I was filling no fishers tho... :)

Cheers
RicB

    Kill two boids wit one stone.

    After the bridge pins are removed, fill the holes with epoxy. This
    will seep into fishers in the root and fill the holes, top off as it
    soaks in.  Route off the cap
    and any small amount of void can be filled with the epoxy which is
    used to adhere the cap.
    -- 

    Regards,

    Jon Page