Hole cutter - epoxy together as many inch-thick (or however thick) hardwood disks together to make up however long a plug you need. Terry Farrell ----- Original Message ----- > David asks: > << it looks like the large > lag screws it was attached with had just been ripped out of their > holes. How would one fill or otherwise reconstruct those holes in the > back of the case so that the screws would have something to be > screwed into? >> > > And Ed Foote replies from his hospital bed..... > I have had great success with installing 1/2 plugs made from Falconwood > or > Delignit. If the tear was larger than that, perhaps a 3/4" plug would be > called for. I haven't actually seen a tenon cutter that big, but I bet > there is > one made.
This PTG archive page provided courtesy of Moy Piano Service, LLC