Well, at least he loves you!!! I don't get it either. Love, pw I don't know enough about older period instruments to be of help ! Sorry... "Gevaert Pierre" <pierre.gevaert at belgacom.net> Sent by: pianotech-bounces at ptg.org 08/06/2008 04:12 PM Please respond to Pianotech List <pianotech at ptg.org> To "'Pianotech List'" <pianotech at ptg.org> cc Subject RE: Broadwood wat about? At least one reply to my post but I don’t understand what this has to do with Broadwood tuning pins ? Am I missing something ? Otherways I still think this would be an interesting subject.. Cheers, Pierre Gevaert De : pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] De la part de Kenny Finlayson Envoyé : mardi 5 août 2008 4:32 À : Pianotech List Objet : Re: Broadwood broken tuning pin I love you too. ----- Original Message ----- From: Gevaert Pierre To: 'Pianotech List' Sent: Sunday, August 03, 2008 11:59 AM Subject: RE: Broadwood broken tuning pin Hi, The Boudoir grands I know about have the (square)pins screwed for about 2/3 into the iron plate and 1/3 into wood. I tuned several and some stayed in tune quite well (afther more than 130 years !) Others had the pins to loose. I don’t know if it is possible to find such tuning pins nor if it these would hold better. There is some explanation on the lest front side of the soundboard near the basstrings but I think this is only to explain how to change a string. I’m also interested to know how to make this kind of pins tight again. Like some use ca glue for wooden pinblocks would it be possible to use a kind of product like Locktite for metal threads ? This is used for making the threads tighter and exists in several strenghts. Of course this may sound stange for using this kind of stuff for historical pianos but I can’t see another way exept maybe make threaded pins that are a little bigger or maybe a better choise to change the wooden part of the block (beech)so that at least the pins get some new grip there. In this way it would be possible to clean and reuse the original pins. There are many of those Boudoir grands remaining today so I would eventually be possible to find another similar instrument for using spare parts. Pierre Gevaert -----Message d'origine----- De : pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] De la part de John Delacour Envoyé : dimanche 3 août 2008 19:58 À : Pianotech List Objet : Re: Broadwood broken tuning pin At 15:28 +0200 3/8/08, stephan van meirhaeghe wrote: >Hi list, > >I'm now restoring a Broadwood grand 'Boudoir' and had to remove all >the tuning pins because to rusty and not possible to tune... >Anywone had similar problems?And where can I find similar pins?Or do >I need make new ones? Are you talking of the threaded pins that screw into an iron plate? If so, send a photo. I can't help you but I'll be doing some work with a colleague soon who may have some. JD No virus found in this incoming message. Checked by AVG - http://www.avg.com Version: 8.0.138 / Virus Database: 270.5.12/1589 - Release Date: 03/08/2008 1:00 PM -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080806/94e4bf2e/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC