>I think if you look a bit closer to replies Les made to a couple posts, >including at least one of mine, he states that it is one damper that is >clacking and that it is because the bushing is not able to do its job. Has it been ascertained that the hole is in the wrong location? My money is on excessive side pressure. I was working on a B dampers the other day and the first tenor damper was a bit of a chore to get right. I had to adjust the bends to remove the excessive side bearing, finesse the angle of the head to the top bend adn sand a little off the back of the head. One thing, while the upstop rail was up, the top-bend hit the strut and clicked. Possibly not what happened this case but something to bear in mind. -- Regards, Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080807/5d54e583/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC