I've got a pdf describing a keytop planer that Bill Spurlock designed (uses a router). Happy to share it with anyone interested. Email me directly if interested. terry at farrellpiano.com Terry Farrell ----- Original Message ----- > I searched the archive for this info before this post and there doesn't > seem to be much specific info. > > I have been using a table saw to remove old keytops for years and I would > like to switch to a planer, which seems to be a little more civilized. > > I purchased a Ryobi planer, but it has a stock feeder which pulls work in, > but is not conducive to pulling the work out again. The feeder cannot be > disabled. > > I was hoping that any of you who use a planer for keytop removal would be > willing to share what type of planer you use. Since I need to acquire > one, it probably won't be useful to post about a machine that's been in > use for 20 years and no longer readily available. > > Thanks in advance, > Matt >
This PTG archive page provided courtesy of Moy Piano Service, LLC