>were to do them, a small drum sander would likely work very well. I have a >small rubber drum about 3 inches in diameter and maybe 4 inches long from >Sears. I'd chuck that into my Shop Smith and grind away.... Getting a squared surface is hard enough with a router bit. There is too much chatter with a drum sander to get a true surface. -- Regards, Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080810/18bf1b5a/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC