Thanks Dale. Paul C From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of erwinspiano at aol.com Sent: Saturday, December 13, 2008 11:04 AM To: pianotech at ptg.org Subject: Re: [pianotech] Steinway under lever tray Paul the tray width is 3 inches. Pics later gotta gooooo.......... Dale -----Original Message----- From: erwinspiano at aol.com To: pianotech at ptg.org Sent: Sat, 13 Dec 2008 8:03 am Subject: Re: [pianotech] Steinway under lever tray Thanks, Dale. I do not have an old tray. Paul C 0A Paul I beleive all underlever trays for s,m,o are the same up to the teflon era. Do you have any old trays from those models even back as far as 1900. The trays didn't change much if at all. If you ahve an old one... CHeck that dimension. I'll look in an hour or so & see what I have on the shelf. Dale shop. I need the dimension of the under lever tray measured from the flange rail to the front edge. Please include the thickness of the tray. I’m replacing the back action and cut the tray too narrow. I took the dimensions from the original, not knowing the front piece was missing. This is the grand that was in a flood, and there are a lot of little details missing e.g. all of the felt in the action was gone. The piano is about 95% finished, coming together very well. Thanks to all who respond. Paul C _____ Listen to 350+ music, sports, & news radio stations – including songs for the holidays – FREE while you browse. Start Listening Now <http://toolbar.aol.com/aolradio/download.html?ncid=emlweusdown00000013> ! _____ Listen to 350+ music, sports, & news radio stations – including songs for the holidays – FREE while you browse. Start Listening Now <http://toolbar.aol.com/aolradio/download.html?ncid=emlweusdown00000013> ! _____ Listen to 350+ music, sports, & news radio stations – including songs for the holidays – FREE while you browse. Start <http://toolbar.aol.com/aolradio/download.html?ncid=emlweusdown00000013> Listening Now! -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20081213/5f82d68f/attachment-0001.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC