Pianoteck sells "Hammerhead Felt Clamp",item #HCL-4,page D-20 This tool works.good Luck...isaac _____ From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of mccleskey112 at bellsouth.net Sent: Sunday, January 06, 2008 8:07 PM To: Pianotech List Subject: Re: hammers felt coming apart The best thing I have found to use is rubber bands. Loop them around the hammer felt until they are tight and let them set until the glue is dry and then just cut them off. I understand that violin makers use them a lot in their craft for clamping. Gerald Mc ----- Original Message ----- From: PIANO2NR at aol.com To: pianotech at ptg.org Sent: Sunday, January 06, 2008 8:09 PM Subject: Re: hammers felt coming apart In a message dated 1/6/2008 8:35:37 P.M. Eastern Standard Time, mbjwisenbaker at juno.com writes: It's the big bass hammers that are harder to fix You might try using long nose vice grips to hold the felt while glue cures. Randy Mangus Mangus Piano Service 140 Atkinson Ave. Wheeling, WV 26003 _____ Start the year off right. Easy <http://body.aol.com/fitness/winter-exercise?NCID=aolcmp00300000002489> ways to stay in shape in the new year. -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080106/d51213bc/attachment-0001.html
This PTG archive page provided courtesy of Moy Piano Service, LLC