I guess it was done by Alvin and the Chipmonks....(or Benny Beaver at OSU) ;>) pw "William R. Monroe" <pianotech at a440piano.net> Sent by: pianotech-bounces at ptg.org 01/10/2008 07:07 PM Please respond to Pianotech List <pianotech at ptg.org> To "Pianotech" <pianotech at ptg.org> cc Subject custom hammers OK all you custom hammer hangers, you've got nothin' on these babies!! I took this action in for rebuild, the previous "job" (can you call it that) left a bit to be desired. I swear, it looks like it had to take four times as long to "checker" these hammers so desperately wrong than to just do it right. Nice glue collar though, eh? ;-] William R. Monroe -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080111/2d1a8516/attachment-0001.html -------------- next part -------------- A non-text attachment was scrubbed... Name: bad hammers 3.jpg Type: image/jpeg Size: 30041 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20080111/2d1a8516/attachment-0003.jpg -------------- next part -------------- A non-text attachment was scrubbed... Name: bad hammers 1.jpg Type: image/jpeg Size: 31510 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20080111/2d1a8516/attachment-0004.jpg -------------- next part -------------- A non-text attachment was scrubbed... Name: bad hammers 2.jpg Type: image/jpeg Size: 27639 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20080111/2d1a8516/attachment-0005.jpg
This PTG archive page provided courtesy of Moy Piano Service, LLC