It takes longer because the unisons particularly do not clean up as easily as, say a Yamaha. You keep fighting it trying to get a clean unison and it just doesn't get there. It sounds good after you are done, but when you are fighting it you think it is going to sound awful. Personally, I'd just as soon avoid 'em. Dean Dean May cell 812.239.3359 PianoRebuilders.com 812.235.5272 Terre Haute IN 47802 -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of John Formsma Sent: Wednesday, January 23, 2008 9:36 AM To: Pianotech List Subject: Re: Charge more to tune a Steinway? On Jan 23, 2008 7:58 AM, William R. Monroe <pianotech at a440piano.net> wrote: > > > I'd guess it's an experience issue, Julia. Why does it take you longer on > S&S? Is it the lack of plate bushings? If so, that just takes some getting > used to (experience) but isn't really all that difficult, just a different > feel, IMO. If it IS an experience issue, clients shouldn't be paying you to > learn. > > JMO, > William R. Monroe
This PTG archive page provided courtesy of Moy Piano Service, LLC