Pearl River grand problem

[David Ilvedson]

If you search the archives you'll find the solution in regards to a Kawai, from Don Mannino...should be similar...

David Ilvedson, RPT
Pacifica, CA  94044

----- Original message ----------------------------------------
From: "Martin Wisenbaker" <mbjwisenbaker at juno.com>
To: pianotech at ptg.org
Received: 1/23/2008 7:30:33 PM
Subject: Re: Pearl River grand problem


>I am the piano technician for a school district in NE Houston, TX. At one
>of the high schools there is a Pearl River grand where the sustain pedal
>must have been played as if it were the pedal of a bass drum. The pin
>that supports  the damper tray  on its right end is  broken  in  two. 
>Can anyone explain how 1) to remove the tray, 2) how to extract the
>broken piece from the block attached to the tray itself. 

>Thanks,
>Martin Wisenbaker, RPT
>Houston, Texas