That's the way I'd do it. I just put up a picture of that operation on a Kranich & Bach which needed relocating of flange screws. Just like recapping a bridge, but no chisel work. Renner sells a bit for use with their back action kit that you will find useful. Fenton ----- Original Message ----- From: "Marcel Carey" <mcpianos at hotmail.com> To: "Pianotech List" <pianotech at ptg.org> Sent: Tuesday, January 29, 2008 11:10 AM Subject: RE: Plugging and redrilling an action rail > > Hi John, > > Why not use a router and then glue in a piece of maple or your other hard > wood of choice. This would prevent drilling in some glue joints. > > Marcel Carey, RPt > Sherbrooke, QC > _________________________________________________________________ > > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC