Mike - Ray, The clear fingernail polish is much too glossy and it would probably melt the soundboard varnish. A little satin polyurethane varnish would serve much better. Al G Allied PianoCraft PO Box 1549 High Point, NC 27261 (336) 454-2000 PianoTech at alliedpianocraft.com www.alliedpianocraft.com ----- Original Message ----- From: "Michael Kurta" <mkurta at roadrunner.com> To: "Pianotech List" <pianotech at ptg.org> Sent: Wednesday, January 30, 2008 9:00 PM Subject: Re: Loose soundboard decal > Ray: > I wonder if a coating of clear fingernail polish around the edges would > keep it down? > Mike Kurta > > -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080131/8dabed48/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC