Not operator error, but sub-optimal wheel material. Use the larger, thicker, fiber-reinforced wheels. The little paper-thin wheels will shatter if you look at them wrong. Phil Bondi wrote: > > > Porritt, David wrote: >> Does no one else cut strings with a Dremel tool? I take tension down >> a turn (well I did the last time I did any belly work) and then cut >> the strings with the cutting wheel with a Dremel tool. Very fast! >> > David, I tried that. I was going through wheels like crazy. > > Operator error? >
This PTG archive page provided courtesy of Moy Piano Service, LLC