The piano is a Cable drop-action with several hammer felt separations from the bottom of the hammer, the top is still attached (for the moment). Is it possible to glue/clamp the felt while still in the piano? I would hate to have to pull the action.all those lifter wires to take off and put back in the slots. What type of adhesive is the best to use? Wood glue? PVE glue? What type of clamps..any kind? Thank you. Brian P. Doepke, RPT A.A.A. Piano Works, LLC Piano Tuning + Service aaapianoworks at verizon.net -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080709/00763ddf/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC