Brian Move the hammer next to it forward, and squirt the glue on and then spray it. It might be a little messy, but it works. Willem (Wim) Blees, RPT Piano Tuner/Technician Honolulu, HI 808-349-2943 www.bleespiano.com Author of The Business of Piano Tuning available from Potter Press www.pianotuning.com -----Original Message----- From: AAA Piano Works, LLC <aaapianoworks at verizon.net> To: 'Pianotech List' <pianotech at ptg.org> Sent: Fri, 11 Jul 2008 7:48 am Subject: RE: hammers separated from bottom of molding I understand the procedure, but how would I apply the CA glue to the bottom of the molding? I am guessing that I really do need to remove the action and the hammers for this procedure in order to get the CA to the molding. I like that fact that it is quick.. :-) Brian -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Don Sent: Thursday, July 10, 2008 12:09 PM To: Pianotech List Subject: RE: hammers separated from bottom of molding Hi Kerry, Any water based glue will work. Look on the label. At 12:08 PM 7/10/2008 -0400, you wrote: >Does titebond work as well as white glue? > > >Kerry Kean >Kent, Ohio > >-----Original Message----- >From: Don [mailto:pianotuna at accesscomm.ca] > >Hi Brian, > >Since it is not really a piano anyway. > >Apply white glue to the felt and CA glue to the molding. Clamp with your >fingers (careful CA is quite exothermic) (double careful it bonds skin >instantly). The moisture in the White glue will cause the CA to cure >instantly and will provide a better bond than CA by itself. Regards, Don Rose, B.Mus., A.M.U.S., A.MUS., R.P.T. Non calor sed umor est qui nobis incommodat mailto:pianotuna at yahoo.com http://us.geocities.com/drpt1948/ 3004 Grant Rd. REGINA, SK, S4S 5G7 306-539-0716 or 1-888-29t-uner -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080711/8c6e308a/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC