What´s about clamps, e.g. like these? http://www.meyne-klaviertechnik.de/start.php?go=10details&id=3079&code=2&zustand=4&site=10 Gregor From: jackhouweling at dccnet.com To: pianotech at ptg.org Subject: Key Bushing Date: Mon, 14 Jul 2008 21:29:31 -0700 Hello everyone, I am rebushing a set of keys for a Chickering grand and the balance pin holes are an odd size and do not fit any of my Spurlock cauls. What do you do in this situation? Do you special order cauls or can you make them yourself? I quickly made a set of mortise sizing cauls out of maple and so far they have worked good. I now have to make the key bushing cauls I and II. I will be using maple again because it is all I have and I find it easy to work with. I hope this is a good way to do this or if anyone has any other suggestions please let me know. Regards, Jack Houweling _________________________________________________________________ News, entertainment and everything you care about at Live.com. Get it now! http://www.live.com/getstarted.aspx -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080715/aa6b1b3b/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC