Should be and limiting pedal shift was what I was thinking if the problem can't be solved any other way. Also, did anyone suggest checking to be sure that the strings are level? Have you also tried to determine just which is the offending string on these notes? David Love davidlovepianos at comcast.net www.davidlovepianos.com -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Thomas Cole Sent: Wednesday, July 16, 2008 10:20 PM To: Pianotech List Subject: Re: Noisy Dampers on Shift I've added your suggestions to the "things to try" list, even though I'm pretty sure that hammer alignment is quite good. Also shouldn't partial shift be the same as unshifted as far as damper effectiveness is concerned? One out I do have is to just limit shift pedal travel. Tom
This PTG archive page provided courtesy of Moy Piano Service, LLC