Hi Al, Please relate what kind of reamers you use and how you use them. Many thanks, Alan Eder -----Original Message----- From: AlliedPianoCraft <AlliedPianoCraft at hotmail.com> To: Pianotech List <pianotech at ptg.org> Sent: Sun, 20 Jul 2008 4:28 pm Subject: Re: Using sandpaper on tuning pins. SNIP ...I never restring a piano without resizing the tuning pin holes with a high quality precision reamer. I re-pin into new wood. No rust, etc, and all the holes are sized alike for even tightness. You can buy some very nice 3/0 or 4/0 tuning pins with a 2/0 top. Works for me. ? Al Guecia -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080721/5e163b8f/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC