> Here are some photos of the roughed in bridge layout. The long bridge has > been cut but with a bit of extra so that it may be trimmed a bit more when > all is done. You can see the placement of the transition bridge as well. > The cantilever has been removed from the bass bridge and it has been moved > forward. The cutting of the long bridge has created more space between the > low end of the bass bridge and the low end of the tenor bridge. What you > don't see is that a bridge extension has been added to the top end of the > bass bridge which is hidden underneath the plate and curves away from the > nose bolt toward the rim. The transition bridge will have a bit of an > extension on the low end in its final form as well. > > David Love It wouldn't take much plate grinding in the corner to tighten that radius and move that low bass down another 20mm. I think I'd do that. I got 135mm A-0 in a model L I'm finishing up. Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC