That's a pretty double loop if I ere did see one. Kindest Regards, Garret --- Garret Traylor - President High Point Piano & Music Inc. PO Box 310 Trinity, NC 27370 3407 Archdale Road Suite A Archdale, N.C. 27263 88-PIANO (336) 887-4266 88-MUSIC (336) 886-8742 www.highpointpiano.com hpp at highpointpiano.com Hours: Tue-Fri 1-7; and Sat 10-6 and by appointment. "Our joy is putting smiles on our clients' faces!" -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of John Delacour Sent: Wednesday, May 07, 2008 5:25 PM To: College and University Technicians Cc: pianotech at ptg.org Subject: Re: [CAUT] Double loop eye forming jig As an alternative to Ron's jig, I have uploaded pictures and a description of how I make these eyes to: <http://pianomaker.co.uk/technical/double_eye/> The necessary equipment can be got together at practically no expense in a matter of an hour or so. JD
This PTG archive page provided courtesy of Moy Piano Service, LLC