I have to clamp... David Ilvedson, RPT Pacifica, CA 94044 Original message From: "Scott Jackson" To: Received: 11/27/2008 7:06:58 AM Subject: Re: [pianotech] PVC-E and keytops Diane, I don't know why you had a problem. I've used it for a few key-sets without issue. I paint the glue onto the keystick with a brush - coat one surface only. Just lay the keytop on; no clamping required. Hardly a procedure at all, but that's why I like it. Quick and simple. Scott Jackson -----Original Message----- Had an unfortunate experience with PVC-e in installing a set of keytops about 1985--they came off in less than one week--so I have never used it since. BUT I know many of you do with success, and I want to try it on a set that I will be installing in my living room. Since the archives are down, can someone help me with procedure? Thanks much! Diane Hofstetter -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20081127/cb54221d/attachment-0001.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC