Hi All, I want to thank everyone for their opinions and suggestions, both private and public.? There's definitely more than one way to skin THIS cat!? I particularly appreciate the offers of help.? Next step is to find out whether the customer needs gen-u-wahn Steinway parts. Thanks, and I'll keep y'all posted. Dave Stahl, RPT Dave Stahl Piano Service dstahlpiano at sbcglobal.net dstahlpiano.net -----Original Message----- From: piannaman at aol.com To: pianotech at ptg.org Sent: Thu, 2 Oct 2008 8:44 am Subject: Re: (a first for me...) new hammers for 1927 s and s L Hi Paul, Thanks for the input.? The shanks and flanges will also be replaced. Dave Stahl, RPT Dave Stahl Piano Service dstahlpiano at sbcglobal.net dstahlpiano.net -----Original Message----- From: Paul T Williams <pwilliams4 at unlnotes.unl.edu> To: Pianotech List <pianotech at ptg.org> Sent: Thu, 2 Oct 2008 8:28 am Subject: Re: (a first for me...) new hammers for 1927 s and s L Dave, I rebuilt a '32 Steinway L two years ago and used Wally Brook's (Abel) Natural Felt hammers and everyone (piano faculty) loves it! ?His prices for boring and tapering, etc., are also very reasonable. ?Otherwise, I'd go with Steinway hammers. ?Are the shanks/flanges and knuckles good enough to keep for the whole new life of the hammers? Always think ahead....(why do I know this??? ;>) ?) Paul T. Williams RPT Piano Technician University of Nebraska Lincoln, NE pwilliams4 at unl.edu piannaman at aol.com Sent by: pianotech-bounces at ptg.org 10/02/2008 10:10 AM Please respond to Pianotech List <pianotech at ptg.org> To pianotech at ptg.org cc Subject (a first for me...) new hammers for 1927 s and s L Liszters, I have a customer, who also happens to have a son who's a classmate of my son, who has an old L that's in pretty good shape, except the hammers are shot. ?No room for shaping left on them. ?But the strings are good, board is good, block is good . It's pretty solid all-round. ?So after years of being pretty much strictly a home-service guy, I'm going to jump in and put a new set of hammers on this piano. ?It will be the first complete set I've ever replaced. ? I have had a few suggestions from folks on type of hammer, notably Steinway(sticking with the original, expensive) and Abel (more ready out-of-the-box, cheaper). I like the Ronsen VFGs that are on my Mason, too, but am not sure they'd match up well with the Steinway. ? I was assuming that I'd go with Steinway, but I need to ask the customer if authentic Steinway parts are necessary. ?Since I'm not tooled up to bore my own hammers, I'll probably get them pre-bored/pre-hung. ? Any suggestions or input would be welcomed. ? Dave Stahl, RPT Dave Stahl Piano Service dstahlpiano at sbcglobal.net dstahlpiano.net Find phone numbers fast with the New AOL Yellow Pages! Find phone numbers fast with the New AOL Yellow Pages! -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20081003/29427b2a/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC