DavidS Wrote: > "The efficiency will show up in you final Balance Weights.... If > your spec BW was 38 and you end up with an average level of 38 then > your distance ratio matches your weight ratio and the efficiency > ratio is 1.0. If you end up with and average result of 36 then > you've got a super efficient setup and your efficiency ratio is > above 1.0. If your average BW ends up say 40 then your efficiency > ratio is below 1.0 and the setup would benefit with some tweaking." RicB Wrote: >... then it would appear that plugging a good estimate of the distance >ratio into your equation of balance is just the thing to do. That way BW >not only serves as a diagnostic for key to key ratio problems but as a >diagnostic and indeed yeilds a direct value for the efficiency ratio. The wonders never cease! Thanks Ric, David Stanwood
This PTG archive page provided courtesy of Moy Piano Service, LLC