Jack Flange Repair

[Joe And Penny Goss]

Knife saw, chisel
Saw sides then chisel middle if it does not break out with pliers..
#335
Joe Goss RPT
Mother Goose Tools
imatunr at srvinet.com
www.mothergoosetools.com
  ----- Original Message ----- 
  From: Matthew Todd 
  To: pianotech at ptg.org 
  Sent: Wednesday, October 22, 2008 4:43 PM
  Subject: Jack Flange Repair


        I will be repairing two jack flanges shortly.  They both have the original jack still glued on, but broken.

        What is the best way to remove the old flange, and glue the new one on.


        Thanks!


        TODD PIANO WORKS 
        Matthew Todd, Piano Technician 
        (979) 248-9578
        http://w
        ww.toddpianoworks.com 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20081022/d11161be/attachment.html