To my more experienced brethren (and sistren?) on the forum: I've been trying to send pictures of my hammer tapering jig to the forum for the past 2 days, but without success. I have had no problem composing my text and placing my 3 pictures into the message. I took the pictures in VGA, the lowest setting on my Sony digital camera. Picassa 3, the image editing freeware program, tells me each of these images is 133KB. The first time I tried to send the message it bounced back from my server. I surmised that perhaps it was too large, so I broke it up into two messages, one with two pictures and the other with one. So the larger should have been 266 KB plus whatever the small amount of text that accompanied it should add (I would guess it shouldn't be over 300 KB). The second message would be 133 KB plus text - 150 to 175 KB max. However, when I looked at these messages from my Sent Items folder in MS Outlook 2007, it tells me that the larger message is 1 MB, and the smaller 478 KB. I sent these messages twice and they simply disappeared into the ether, no rejection notice from the Forum server, no show on the Forum either. Just nothing. Are my two messages still too large for the PTG forum server? I would be grateful for any and all suggestions from those who have some experience posting pictures to the forum as to how to go about this. Should I try to send them as attachments? Thanks in advance for your help. Will Truitt -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080911/9cd5c8ec/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC