I'm working on a Samick SG-150. The action spread was about 55mm. I loosened the screws and moved the aluminum rail back. I now have 60mm between the hammer shank flange centerpin and the repetition lever centerpin. It won't move any further. Getting a 64mm spread is impossible without removing the aluminum rail and altering it. _________________________________________________________________ Windows Live™: Keep your life in sync. http://windowslive.com/explore?ocid=TXT_TAGLM_WL_allup_1a_explore_042009 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090404/6977414e/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC