Yummy... then it smells like a pickle! <g> (it does work, however!....) Paul "Al Guecia/AlliedPianoCraft" <AlliedPianoCraft at hotmail.com> Sent by: pianotech-bounces at ptg.org 04/07/2009 04:28 PM Please respond to pianotech at ptg.org To "David Ilvedson" <ilvey at sbcglobal.net>, <pianotech at ptg.org> cc Subject Re: [pianotech] key bushing glue David, Add white vinegar to the water/wallpaper remover mixture. Then I heat the bushings with the hot soldering iron as you mentioned. The vinegar does help. Takes a little time, but it's the only way I know to do it. Al From: David Ilvedson Sent: Tuesday, April 07, 2009 4:52 PM To: caut at ptg.org ; pianotech at ptg.org Subject: [pianotech] key bushing glue What fun removing old key bushings on a Conover 77 Grand. A white pasty glue that wouldn't let go...I soaked with water/wallpaper remover...even with my heated bushing remover tool...it is a pain. Any ideas on a better way with this stuff...whatever it is? USE HIDE GLUE FOR KEY BUSHINGS David Ilvedson, RPT Pacifica, CA 94044 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090407/9e4eedb8/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC