Center them under the wippens not in the keystick. Often the center of the keystick does not offer uniform spacing. David Love www.davidlovepianos.com From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Gene Nelson Sent: Thursday, April 09, 2009 8:16 AM To: pianotech at ptg.org Subject: [pianotech] silly question Moving key capstans, old threaded holes are ready to plug. It has become obvious that some of these holes are not centered on the keystick. My inclination is to center the new holes but could this be a mistake for later hammer string whippen key capstan alignment? Do factories pay attention to these details? Gene -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090409/d76e8364/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC