I use Protec, too. But I mark the keys with a pencil so that I know the next time which keys I worked on. When the same keys are bad, there is no need to try it with Protec again. Gregor To: toddpianoworks at att.net; pianotech at ptg.org Date: Mon, 13 Apr 2009 23:21:22 -0400 From: wimblees at aol.com Subject: Re: [pianotech] TIght jack flange bushings Todd A damp chaser will certainly solve most of your sticking problem in the long run, but for immediate relief, you're going to have ream. But before you do that, if you've got Protek, give it a few drops, and see what happens. Willem (Wim) Blees, RPT Piano Tuner/Technician Mililani, Oahu, HI 808-349-2943 Author of: The Business of Piano Tuning available from Potter Press www.pianotuning.com -----Original Message----- From: Matthew Todd <toddpianoworks at att.net> To: pianotech at ptg.org Sent: Mon, 13 Apr 2009 2:27 pm Subject: [pianotech] TIght jack flange bushings I have a customer I tuned for five months ago. At that appointment, I had to ream two tight jack flange bushings. She just told me the other day another key is starting to stick (I am taking for granted that it's the same issue). Do I need to ease all the jack flange bushings, or will this more than likely be resolved installing a complete dampp-chaser? TODD PIANO WORKS Matthew Todd, Piano Technician (979) 248-9578 http://www.toddpianoworks.com A Good Credit Score is 700 or Above. See yours in just 2 easy steps! _________________________________________________________________ News, entertainment and everything you care about at Live.com. Get it now! http://www.live.com/getstarted.aspx -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090414/56d25919/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC