[pianotech] Not again, Young Chang contact for action

paul bruesch paul at bruesch.net
Wed Apr 22 18:41:42 PDT 2009


The one set I've done expanded in both (significant) directions. But even if
it was just the height that expanded, the measurement includes a vertical
component, n'est-ce pas? Which would then be off, n'est-ce pas?

Paul

On Wed, Apr 22, 2009 at 8:34 PM, <wimblees at aol.com> wrote:

> Not that I am aware of. The main problem is the height of the action
> bracket. But to be on the safe side, you should have the measurements.
>
> Wim
>
> -----Original Message-----
> From: paul bruesch <paul at bruesch.net>
> To: pianotech at ptg.org
> Sent: Wed, 22 Apr 2009 3:23 pm
> Subject: Re: [pianotech] Not again, Young Chang contact for action
>
>  Isn't the existing action spread a big part of the symptom/problem?
>
> Paul Bruesch
> Stillwater, MN
>
> On Wed, Apr 22, 2009 at 8:20 PM, <wimblees at aol.com> wrote:
>
>> Todd
>>
>> You just need the model and serial # to get the brackets. You should
>> measure the action spread before removing the old ones, just too make sure
>> you get it correct when you put on the new ones.
>>
>> Wim
>>
>> -----Original Message-----
>> From: Matthew Todd <toddpianoworks at att.net>
>> To: pianotech at ptg.org
>>   Sent: Wed, 22 Apr 2009 2:27 pm
>> Subject: Re: [pianotech] Not again, Young Chang contact for action
>>
>>    Since we are on the subject, AGAIN, (and I didn't start it this
>> time!).....
>>
>> Do I need to measure the action spread in order to obtain the right
>> brackets, or will a model and serial number suffice?
>>
>>  ***TODD PIANO WORKS*
>> Matthew Todd, Piano Technician
>> (979) 248-9578
>> http://www.toddpianoworks.com
>>
>>
>> --- On *Thu, 4/23/09, wimblees at aol.com <wimblees at aol.com>* wrote:
>>
>> From: wimblees at aol.com <wimblees at aol.com>
>> Subject: Re: [pianotech] Not again, Young Chang contact for action
>> To: pianotech at ptg.org
>> Date: Thursday, April 23, 2009, 12:18 AM
>>
>> YC will send the action brackets at no charge. But they no longer pay to
>> have them installed.
>>
>> Wim
>>
>>
>> -----Original Message-----
>>
>>
>> From: Dave Bunch <pdtek at mchsi.com>
>> To: pianotech at ptg.org
>> Sent: Wed, 22 Apr 2009 12:21 pm
>> Subject: Re: [pianotech] Not again, Young Chang contact for action
>>
>> I suggest that you charge the customer for the full amount of this repair.
>> I did one two years ago and never got paid anything by Young Chang.
>>
>> Dave Bunch
>>
>>  ------------------------------
>> Green cleaning products -- do they work as well? *Find out now!<http://home.aol.com/new_in_home/photogallerytall/_a/spring-cleaning-products-put-to-the-test/20090407180609990001?ncid=emlweushome00000001>
>> *
>>
>>
>>  ------------------------------
>> Green cleaning products -- do they work as well? *Find out now!<http://home.aol.com/new_in_home/photogallerytall/_a/spring-cleaning-products-put-to-the-test/20090407180609990001?ncid=emlweushome00000001>
>> *
>>
>
>
> ------------------------------
> Green cleaning products -- do they work as well? *Find out now!<http://home.aol.com/new_in_home/photogallerytall/_a/spring-cleaning-products-put-to-the-test/20090407180609990001?ncid=emlweushome00000001>
> *
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090422/1ca29f38/attachment.html>


More information about the pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC