Just replaced a few double flanges on an old steinway upright. The parts from Schaff worked after shaving just a bit from the birds eye "boss". This has the standard steinway action rail. Does yours? On Tue, Apr 28, 2009 at 6:36 PM, Rex Roseman <rosemanpiano at gmail.com> wrote: > I tune a Steinway Upright #15234 that is supposed to be from 1867 and one of > the double flanges for the damper/hammer assembly has broken. Looking in the > catalogs, there seems to be nothing that would be the correct size and shape > to replace the part. Does someone have such a part or know of where I can go > to get one? > > > > Thanks. > > > > Rex Roseman > > -- Regards, Jeff Deutschle Please address replies to the List. Do not E-mail me privately. Thank You.
This PTG archive page provided courtesy of Moy Piano Service, LLC