Al Guecia/AlliedPianoCraft wrote: > Hi List, > > There was a discussion and some photos on this list about retrofitting a > back action with adjustable let-off or capstan type adjustment screws. I > am rebuilding a Steinway and would like to try it. Any photos showing > the finished shelf and lifters, would be greatly appreciated. > > Al Hi Al, Here's what I've been using, until I find something better. They're 10-24 hex head machine screws, 1/2" long. The problem I found was getting something with a thin enough head, so I bought the recessed head screws and turned the raised edge off on a lathe. Inelegant, but it works. Ron N -------------- next part -------------- A non-text attachment was scrubbed... Name: damper capstan.jpg Type: image/jpeg Size: 44175 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090430/0644dbbd/attachment-0001.jpg>
This PTG archive page provided courtesy of Moy Piano Service, LLC