Here are a couple of other photos. The capstans are from Schaff. Sadly, they no longer carry the 11/16" long ones (559C on page 132) which are perfect length and you have to go to the next one 559 D which sometimes require trimming when the protrude through the bottom of the damper tray. But being brass that's not too difficult. The recess in the tray can be easily done with a laminate trimmer base (Porter Cable model 3091) which happens to index perfectly off the Renner tray without a jig, and a small router bit. Some people also use a table saw for that operation. It's pretty easy and beats cutting little strips of sandpaper and shoving it under a piece of felt. David Love www.davidlovepianos.com -------------- next part -------------- A non-text attachment was scrubbed... Name: PA250017 (2).JPG Type: image/jpeg Size: 40041 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090430/b34fec1e/attachment-0002.jpe> -------------- next part -------------- A non-text attachment was scrubbed... Name: PA250024 (2).JPG Type: image/jpeg Size: 32673 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090430/b34fec1e/attachment-0003.jpe>
This PTG archive page provided courtesy of Moy Piano Service, LLC