[pianotech] Need insights regarding square grand basshammeralignment

[HERB BRIDGMAN]

Thanks Don,

What I need to know is how to align the bass hammers with the strings and not sacrifice the alignment of the back checks and other action parts.

I'll contact Ronsen for a tech.

Thanks again,
Herb Bridgman
Herbert Piano Service 
  ----- Original Message ----- 
  From: Don Mannino<mailto:donmannino at ca.rr.com> 
  To: pianotech at ptg.org<mailto:pianotech at ptg.org> 
  Sent: Monday, August 03, 2009 7:53 PM
  Subject: Re: [pianotech] Need insights regarding square grand basshammeralignment


  Ronsen Piano Hammers will make replacement hammers cut to fit Square grands.

  http://www.ronsen-hammer.com/catalog.htm<http://www.ronsen-hammer.com/catalog.htm>

  Don Mannino


    ----- Original Message ----- 
    From: HERB BRIDGMAN<mailto:h_stirling at msn.com> 
    To: pianotech<mailto:pianotech at ptg.org> 
    Sent: Monday, August 03, 2009 7:07 PM
    Subject: [pianotech] Need insights regarding square grand bass hammeralignment


    Hi Folks,

    If you know of anyone who can help me figure out the alignment of the bass hammers in a square grand...The info would be most appreciated.

    Sincerely,
    Herb Bridgman
    Herbert Piano Service
    800.814.8863
    Cell: 951.532.4370
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090803/445e878f/attachment-0001.htm>