The July 2009 issue of the Journal has an article with photos. Ed S. ----- Original Message ----- From: Michael Magness To: Pianotech List Sent: Monday, August 17, 2009 2:09 PM Subject: [pianotech] Installing Vertical Piano Hammer Return Springs I am recalling a fairly recent post from someone regarding a method using a long thin rod of some sort through the coils of the springs to keep them oriented while installing. There were pics accompanying the post. I can't find it and for some reason the archives won't accept my password that works fine on the list. I am doing the install this afternoon if the person that posted it or someone that may have a copy of it could repost it or send it offlist I would appreciate it. Mike -- I intend to live forever. So far, so good. Steven Wright Michael Magness Magness Piano Service 608-786-4404 www.IFixPianos.com email mike at ifixpianos.com -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090817/0bc08fed/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC