That does not answer my question If it is the one I am thinking of it stresses the metal. Mine ( not on the site yet ) does not. Joe Goss BSMusEd MMusEd RPT imatunr at srvinet.com www.mothergoosetools.com ----- Original Message ----- From: "David Andersen" <david at davidandersenpianos.com> To: <pianotech at ptg.org> Sent: Saturday, August 29, 2009 4:57 PM Subject: Re: [pianotech] Yamaha jack adjustment > Buy the right tool....with a thin neck. Call Jurgen at Pianoforte > Supply.... > DA > > > > On Aug 29, 2009, at 3:42 PM, Joe Goss wrote: > >> Hi, Are they the ones with the spade end? >> Joe Goss imatunr at srvinet.com >> www.mothergoosetools.com >> ----- Original Message ----- From: "Richard" <richard.ucci at att.net> >> To: <pianotech at ptg.org> >> Sent: Saturday, August 29, 2009 3:45 PM >> Subject: [pianotech] Yamaha jack adjustment >> >> >>> I know this has been discussed before, but what is the trick to >>> regulating Yamaha grand jacks with the dowels in the way. >>> Sent from my iPhone >
This PTG archive page provided courtesy of Moy Piano Service, LLC