[pianotech] Yamaha U1

[Joe Goss]

Replace worn side with leather??
Is the dog leg a factor??
Joe Goss BSMusEd MMusEd RPT
imatunr at srvinet.com
www.mothergoosetools.com
  ----- Original Message ----- 
  From: Matthew Todd 
  To: pianotech at ptg.org 
  Sent: Sunday, August 30, 2009 5:58 PM
  Subject: [pianotech] Yamaha U1


        I recently had a call to fix annoying squeaks that were persistent in a client's piano.  I discovered that on numerous keys (not all), that one side (left side) of the balance rail bushing was worn down.

        Before I go replacing the bushings, what would be the cause of this?  Do you run across this in this particular kind of piano?

        Thank you,


        TODD PIANO WORKS 
        Matthew Todd, Piano Technician 
        (979) 248-9578
        http://www.toddpianoworks.com 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090830/beff3abf/attachment.htm>